Ultra-Reliable Data Transfer: Experience high-speed, stable connections with high performance SD & TF 4.0 ports, supporting up to 312MB/s speeds. (Note: The 10Gbps USB-C connector is designed to match the iPhone’shighest transmission, enabling the card slots to reach 312MB/s for SD 4.0.)
Sync and Power Simultaneously: This USB-C adapter enables simultaneous data syncing and charging at a 42.5W max output when connected to a power source, making it ideal for multitasking professionals. (Note: Power adapter not included.)
Capture to Edit Instantly: Provides a quick switch from capturing video outdoors to editing on a smartphone without delay(note：This adapter is not compatible with iPhone 14/13/12/11 series. ).
Portable and Easy Connectivity: Begin by inserting your SD & TF card, then simply connect the adapter to your USB-C iPhone, and finally, secure it magnetically for stable use.
Note: The native iPhone camera’s 4K 120fps ProRes recording mode requires an external card with a write speed of at least 440MB/s, which surpasses the capabilities of the SD 4.0 protocol. Therefore, for real-time 4K 120fps ProRes recording and storage, we recommend using third-party applications, such as Blackmagic Camera.
What You Get: Anker MagGo USB-C Adapter (3-in-1, 10Gbps, For USB-C iPhone Series), safety sheet, QR code for the user manual, 24-month warranty, and our friendly customer service.
Charge the gimbal using the included USB-C cable (adapter not included)
Charging time: 3 hours
Check battery level on the display – all bars indicate full charge
Power bank feature: When powered off, the gimbal can charge your smartphone using provided cables
Basic Setup
Install the Hohem Joy app on your smartphone
Enable Bluetooth on your phone
Pair the gimbal through the Hohem Joy app
Update firmware if prompted
Balancing the Gimbal
Horizontal Mode
Unlock all three motors:
Pan motor lock
Tilt motor lock
Roll motor lock
Rotate the gimbal with AI tracking sensor at top
Balance the right arm:
Open clamp if right side drops
Move arm right until level
Close clamp when balanced
Center the phone clamp until perfectly level
Vertical Mode
Follow same steps but keep phone balanced centrally in phone clamp
For quick vertical shots: rotate gimbal sideways right into flashlight position
AI Tracking Sensor
Setup
Remove by pressing both side locks
Install in either direction (rear or selfie mode)
Power button on side
Recognition distance: 0.5-5.5 meters
Gesture Controls
OK sign: Start tracking (green light)
Palm sign: Stop tracking (red light)
L sign with both hands: Reframe shot
Shutter control gesture: Start/stop recording
Remote Preview
Detach remote
Swipe right for 2MP camera preview
Double tap or swipe to select tracking object
Side button functions:
Single press: Pause tracking (yellow box)
Triple tap screen: Stop tracking (red icon)
Long press: Calibrate tracking
Alternative you can draw a box with your finger, it turns red. Then pull the trigger to track. This with keep the object where you drew in the frame.
Gimbal Modes
Basic Modes
Pan Follow Mode: Tilt locked, follows side movement
Pan Tilt Follow Mode: Follows side and up/down movement
POV Mode: All motors unlocked
Custom/Lock Mode: Customizable motor locks
Special Modes
Sports Mode:
Press and hold trigger
Single press + hold for fast action tracking
Inception Mode:
Triple press mode button
Adjustable speed and direction
Remote Control Functions
Basic Controls
Joystick: Up, down, side movement
Side Button:
Double press: Re-center
Triple press: Camera flip
Quadruple press: Ultra wide mode
Shutter Button:
Single press: Photo/record
Double press: Photo/video mode switch
Triple press: Front/rear camera switch
Zoom: Roll up/down around shutter button
Advanced Features
Roller Control:
Focus (Hohem Joy app only)
Tilt adjustment
Roll control
Pan motor movement
Light control
Motion Time-lapse:
Up to 6 programmable points
Duration: 1-180 minutes
A/B Waypoints:
Two-point movement programming
Duration: 15 seconds to 60 minutes
Screen Interface
Main Pages
AI Tracker Preview (swipe right)
Control Center (center)
Advanced Settings (swipe left)
Light Controls
CCT Mode: Adjustable color temperature and brightness
RGB Mode: Full color selection with brightness control
Maintenance
Calibration
Auto-calibration: Press mode button 5 times
Manual calibration: Available in settings
Balance check through motor balance menu
Settings
Language: English/Chinese
Sound controls
Motor strength adjustment (Low/Medium/High)
AI tracking customization
Additional Features
Compatible with accessories (microphone, SSD card, counterweights)
Recommended: Hohen VH01 handle for improved grip
Note: For optimal performance, regularly check for firmware updates through the Hohem Joy app.
Hohem iSteady M7 Smartphone Gimbal Manual
Introduction
Welcome to the Hohem iSteady M7 smartphone gimbal manual. This guide will walk you through the setup, functions, and various modes of the gimbal to help you capture smooth and professional footage. Whether you’re a beginner or an experienced videographer, this manual will ensure you get the most out of your device.
Table of Contents
Getting Started
Charging the Gimbal
Installing the Hohem Joy App
Unlocking the Motors
Balancing the Gimbal
Horizontal Filming
Vertical Filming
Turning On and Off
Pairing the Gimbal
Bluetooth Connection
Firmware Updates
AI Tracking and Fill Light
Gimbal Modes
Pan Follow Mode
Pan Tilt Follow Mode
POV Mode
Lock Mode
Remote Control Functions
Joystick and Button Functions
Re-centering and Switching Cameras
Ultra-Wide Angle Mode
Advanced Features
Sports Mode
Inception Mode
Auto Calibration
Touchscreen Controls
AI Tracker Preview
Light Controls
Motor Balance
Scenario Modes
Motion Time Lapse and Waypoints
Follow Speed Settings
Additional Settings
Sound Control
Motor Strength
Calibration
Accessory Ports and Recommendations
1. Getting Started
Charging the Gimbal
Connect the gimbal to a power source using the included USB-C cable.
Use a USB adapter (not included) to plug it into an outlet.
Charging takes approximately 3 hours.
When fully charged, all battery bars will display on the screen.
The gimbal can also act as a power bank:
Connect your phone using the appropriate cable.
Press the power button once to enable charging.
Installing the Hohem Joy App
Download and install the Hohem Joy app from the App Store or Google Play.
Follow the on-screen prompts to complete the installation.
Unlocking the Motors
Unlock each motor:
Pan Motor – Unlock the pan motor by rotating the lock switch.
Tilt Motor – Unlock the tilt motor by rotating its lock.
Roll Motor – Unlock the roll motor by releasing the roll lock.
Ensure the pan motor faces backward and the tilt motor points to the right.
2. Balancing the Gimbal
Horizontal Filming
Place your smartphone in the phone clamp.
Adjust the clamp so the phone is horizontally level.
If one side dips, loosen the clamp and slide the arm until balanced.
Tighten the clamp to secure the phone.
Vertical Filming
Place your smartphone centrally in the clamp.
Follow the same balancing steps as horizontal filming.
3. Turning On and Off
Long press the power button to turn on the gimbal.
To enter standby mode, press the power button twice.
Tap the touchscreen to wake the gimbal from standby mode.
4. Pairing the Gimbal
Bluetooth Connection
Enable Bluetooth on your smartphone.
Open the Hohem Joy app.
Follow the pairing instructions within the app.
Firmware Updates
If a firmware update prompt appears, accept it.
Allow the gimbal to complete the update to ensure optimal performance.
5. AI Tracking and Fill Light
Remove the AI tracking sensor by pressing the side locks.
Install the sensor to face forward or backward.
Turn on the sensor by pressing the power button.
Enable tracking:
Show an “OK” sign to activate (green light will flash).
Show a palm sign to stop tracking (red light).
Adjust framing by showing an “L” sign with both hands.
Start/stop recording with the shutter gesture.
6. Gimbal Modes
Pan Follow Mode – The gimbal follows horizontal movements only.
Pan Tilt Follow Mode – The gimbal follows both horizontal and vertical movements.
POV Mode – All motors are unlocked, allowing full range of motion.
Lock Mode – The gimbal locks the frame regardless of movement.
7. Remote Control Functions
Joystick – Move the joystick up/down or side to side to adjust the gimbal.
Re-center – Double press the side button to re-center the gimbal.
Switch Cameras – Triple press the side button to switch between front and rear cameras.
Ultra-Wide Angle Mode – Press the side button four times to enable ultra-wide angle mode.
8. Advanced Features
Sports Mode – Press and hold the trigger while single-pressing to enter sports mode.
Inception Mode – Triple press the mode button to enter inception mode (auto-rotates the camera).
Auto Calibration – Press the mode button five times to initiate auto-calibration on a flat surface.
9. Touchscreen Controls
Swipe right to preview AI tracking.
Swipe left to adjust motor balance and light controls.
Adjust brightness, tilt, and motor movement through the touchscreen.
10. Motion Time Lapse and Waypoints
Position the camera at point A and press the A button.
Move to point B and press the B button.
Set duration (15 seconds to 60 minutes).
Start the time lapse by double pressing the A or B button.
11. Follow Speed Settings
Slow – For smooth cinematic shots.
Medium – Default follow speed.
Fast – For fast action shots.
12. Additional Settings
Sound Control – Turn off all gimbal sounds for silent operation.
Motor Strength – Adjust motor strength to low, medium, or high.
Calibration – Perform manual or automatic calibration of tilt, roll, and pan.
13. Accessory Ports and Recommendations
Mount accessories such as microphones, SSD cards, and counterweights on the ports.
Recommended: Attach the Hohem VH01 handle for better control and comfort.
Thank you for choosing the Hohem iSteady M7. For further assistance, please visit the official Hohem website or contact customer support.
